Fabrics are tested for flame retardancy according to the standards used in different countries: AS 1530.3 ( Australia), BS 5867 (UK), DIN 4102 (Germany), 92 507 NF (France), ISO 6940 (Netherlands), ISO 6941 (Netherlands).
Weight in grams per metre.
Discoloration due to sunlight. The degree of discoloration is expressed as a number between 1 and 8 on the blue scale, where 1 is the lowest lightfastness and 8 being the highest lightfastness.
The shrinkage after washing or dry cleaning.
Abrasion resistance, the higher the number Martindale, the stronger the fabric.
seam and shear resistance
Decorative use <6000 rpm
Normal usage> 20,000 rpm
Intensive use> 30.000 rpm
Very intensive use> 40.000 rpm
Upholstery fabrics are tested for sensitivity to the "openness" of stitching. In general it can be said that a substance whose tissue wires up to 6 mm from each slide at 180 nm tax, no practical problems. The shear resistance is less, then it is advisable to upholster using double stitching use and locking it off. Sides extra care
See washing instructions.
Is rotating on the surface of protruding fibers to small balls. The extent to which a fabric tends to pill depends on the raw material and yarn composition. The pilling is represented by a number between 1 and 5. 1 is likely to pill and 5 is no pilling.
AC acetate, CL chlorine fiber, cotton CO., EA polyurethane elastomer, LI linen, modal MD, ME metal, polyamide PA, PC acrylic, polyester PE, PL polyethylene, polypropylene PP, SE silk, viscose VI, WM mohair, wool WO, WV wool
Back to Product
||Fulfils medical standard DIN EN ISO 10993-5+10, Antimicrobial, Health care, Easy clean, Resistant to Disinfectant, Oil, Sweat, Blood, Urine, Tear and Abrasion Resistant